Does a control arm kit include the ball joints?

Yes. The ball joints and bushings are pressed in before it ships, which removes the press work that otherwise makes this a workshop job rather than a driveway one.

What are the symptoms of a worn control arm?

A clunk or knock over bumps and at low speed, vague or wandering steering, uneven tyre wear, and an alignment that will not hold its settings. Worn bushings often show as cracked or displaced rubber at the pivot.

Do I need an alignment after replacing control arms?

Yes. The control arm sets camber and caster, so the geometry changes as soon as it is replaced regardless of how carefully the old one is measured.

Mevotech Control Arm Kit with Ball Joints — Rear

Mevotech · SKU SAP-00067 · Our ref CMS60047

A control arm locates the wheel and carries the ball joint and bushings. This kit supplies both sides with ball joints already pressed in, which removes the press work that otherwise makes this a workshop job. Worn arms show up as clunking over bumps, uneven tyre wear or an alignment that will not hold.

Supplied by Mevotech.

In the box: 2 control arms (left and right); Ball joints pre-installed; Bushings pre-installed.

Unknown

Select your vehicle to check fitment

Choose your vehicle and we will check it.

Specifications

Imperial first, metric alongside.

Includes: 2 control arms (left and right); Ball joints pre-installed; Bushings pre-installed
Position: Rear
Shipping: Parcel
CoreCharge: No

Common questions

Does a control arm kit include the ball joints?: Yes. The ball joints and bushings are pressed in before it ships, which removes the press work that otherwise makes this a workshop job rather than a driveway one.
What are the symptoms of a worn control arm?: A clunk or knock over bumps and at low speed, vague or wandering steering, uneven tyre wear, and an alignment that will not hold its settings. Worn bushings often show as cracked or displaced rubber at the pivot.
Do I need an alignment after replacing control arms?: Yes. The control arm sets camber and caster, so the geometry changes as soon as it is replaced regardless of how carefully the old one is measured.

Checking the fit

We confirm the fit by hand on every order. Send your VIN, or the year, engine and trim, and a person checks this part against it before you pay.

Control Arm Kit with Ball Joints by vehicle — prices, what owners report to NHTSA, and the recalls to check first:

Mevotech Control Arm Kit with Ball Joints — Rear

Specifications

Others in this department

Common questions

Checking the fit