Skip to main content
Cart, empty

Baja Designs Sealed LED Light Bar

Baja Designs · SKU SAP-00362

Baja Designs is a California lighting company with long ties to desert off-road racing. A sealed light bar spreads a wide wall of light across the trail ahead, and the choice between spot, flood and combination beam patterns matters more than raw output for most drivers. Roof-mounted bars can whistle at highway speed and cast glare off the hood, so a bumper or grille position is often the better compromise. Aim it level once mounted and tighten the brackets properly.

Auxiliary and replacement LED lighting: sealed bars and pods for trucks that leave the tarmac, sequential tail lights, daytime running strips and puddle lamps. Sealing rating is the specification that decides whether one of these survives its first winter, and it is the one most listings leave out.

In the box: The lamp; Mounting hardware; Wiring where supplied.

Fit check before payment

Order it now. We confirm it fits your car before you pay.

After you place the order, tell us the car's year, make and model, or the VIN, and what the part is for. A person checks the part against that car and sends the invoice only once it is right. If it is not the right part, we cancel the order and you owe nothing.

How the fit check works

Specifications

Imperial first, metric alongside.

Shipping
Parcel

Others in this department

Common questions

Will the Baja Designs Sealed LED Light Bar fit my car?
You can order it now, and we confirm it fits before you pay. For this part, fit comes down to the mounting point, the power draw your wiring can carry, and whether the lamp is legal for on-road use where you drive. After you place the order, tell us the car's year, make and model, or the VIN, and what the part is for, either in the checkout notes or in the chat on this site. A person checks the part against that car and sends the invoice only once it is right. If it is not the right part, we cancel the order and you owe nothing.
Is the Baja Designs Sealed LED Light Bar new or used?
New. It is a new aftermarket part made by Baja Designs, not a used or rebuilt unit.
What warranty does the Baja Designs Sealed LED Light Bar have?
It carries Baja Designs's manufacturer warranty. Baja Designs's terms differ between product lines, so ask in the chat and we give you the terms for this exact part before you pay.
What IP rating should an LED light bar have?
For an LED light bar or pod on a truck, look for IP67 at minimum, which means dust-tight and able to survive temporary immersion. IP68 covers longer or deeper immersion as defined by the maker, and IP69K adds resistance to high-pressure, high-temperature washing. A light without a stated rating is a gamble in rain, snow, and road salt.
Are LED light bars legal to use on the road?
Most auxiliary LED light bars are sold for off-road use and are not legal to use on public roads in most states, especially as driving lights in traffic. Rules vary by state, and many require off-road lights to be covered on the road. Lamps marked as meeting DOT and SAE standards are the ones intended for street use.
Why do my LED turn signals blink fast?
Fast blinking, called hyperflash, happens because LED turn signals draw much less current than incandescent bulbs, so the car reads them as a burned-out bulb. The usual fixes are load resistors, an LED-compatible flasher relay, or coding the lighting module on cars that allow it. Load resistors get hot, so mount them on metal away from wiring.
What is a sequential LED tail light?
A sequential LED tail light lights its turn signal segments in order from the inside out, so the signal sweeps toward the direction of the turn. Aftermarket sequential tail lights are usually sold as left and right units, and installing them as a pair keeps both sides matched. Some vehicles need an adapter or module coding to avoid bulb-out warnings.
How do I install LED daytime running light strips?
LED daytime running light strips usually mount with adhesive tape or clips and wire into a switched power source, often through a relay or a dedicated harness. Clean the mounting surface well, keep wiring away from heat and moving parts, and seal any connections exposed to water. Check that the strip's brightness and color are legal for daytime running lights.
What is a puddle lamp?
A puddle lamp is a small light, usually under a side mirror or door, that lights the ground when the doors are unlocked or opened, so you can see puddles, curbs, and obstacles before stepping out. Projection puddle lamps add a logo or pattern. They are low-power and usually connect to the existing courtesy light circuit.
Why does my LED light bar have water inside?
Water inside an LED light bar or pod usually means the housing seal has failed, the lens is cracked, or the light was never truly sealed despite how it was marketed. Repeated freeze and thaw cycles make it worse. Once water reaches the circuit board, the LEDs and driver corrode, so a light with standing water typically needs replacing.

Checking the fit

We confirm the fit by hand on every order. Send your VIN, or the year, engine and trim, and a person checks this part against it before you pay.